What is the reason why the vertical slurry pump does not get water?

1. The reasons for the severe vibration of the Vertical Slurry Pump are combined with unbalanced electric rotor or poor coupling, wear and bending of bearings, loose rotating parts, and unfirm rupture pipe supports. They can be treated by adjustment, repair, reinforcement, straightening, replacement and other methods.
2. Water leakage or air leakage in the pipe may be due to the installation screw cap is not firmly tightened, and it should be checked at any time.
3. The packing is too tight due to overheating and more, less or cooling water into the damage caused by the shaft surface of the filler, should pay attention to the flow of water, so as to monitor in real time
4. The vertical Slurry Pump does not absorb water or does not drain water, the multiple reasons are that the bottom valve is stuck, part of the silt treatment, the height of the water is too high or leaking, it may also be due to the right of the Impeller caused by rotation, and the road is blocked. After checking one by one, measures such as repairing the bottom valve, removing the blockage, correct steering, and cleaning the impeller can be taken respectively.